| Tru Close Hinges fall into two categories depending the weight of the gate and the amount of traffic that passes through. |
| |
|
|
| Range: |
Regular Duty Range
|
Heavy Duty Range
|
|
view styles & colors |
view styles & colors |
| Use: |
Residential |
Residential/Commercial |
| Application: |
Light to medium weight pool & house gates |
Heavy, large, high-traffic gates |
| Load Rating: |
55lb* gate per pair of hinges
*Based on max. gate size 5'h x 3'w with max. spacing between hinges. TCA1-MK2 has a point load of 440lb. |
132lb* gate per pair of hinges
*Based on max. gate size 6'h x 4'w with max. spacing between hinges |
| Point Load: |
300lb at 31" from pivot point of hinges |
700lb at 44" from pivot point of hinges |
| Cycle Rating: |
50,000 cycles |
200,000 cycles |
| Tension: |
Adjustable. Patented mechanism. |
Adjustable. Patented mechanism. |
| Gap Variance: |
| Model |
Gap in inches |
| L2 |
fixed at 11/16" |
TCA's
(no legs) |
1/4" to 7/8" |
| TCAMA2 |
11/16" to 2-1/8" |
| TCAMA2RND |
3/4" to 2-1/8" |
|
| Model |
Gap in inches |
| L2 |
fixed at 3/4" |
TCHD's
(no legs) |
1/4" to 1" |
| TCHDMA1 |
5/8" to 1-3/8" |
| TCHDRND1 |
3/4" to 1-3/8" |
| TCHDRND2 |
3/4" to 1-3/8" |
|
| Requirements: |
No countersinking or lubricating. |
No countersinking or lubricating. |
| Manufacturing: |
Injection-molded polymers. UV stabalized. |
Injection-molded polymers. UV stabalized. |
| Mount Style: |
Flat, face-fixed to gate & fence |
Flat, face-fixed to gate & fence |
| Opening: |
180 degrees
(GATE STOP REQUIRED) |
180 degrees
(GATE STOP REQUIRED) |
| Spring: |
Stainless steel, torsion type. |
Stainless steel, torsion type. |
| Internal Fixings: |
Stainless steel & brass. |
Stainless steel & brass. |
| Fixing holes: |
7/32 inch |
1/4 inch |
| Colors: |
All hinges available in black. Click Here for white availability. |
All hinges available in black. Click Here for white availability. |